Industrial Labelling Machine Electrical Repairs Perth
Lectro Power Systems provides electrical fault finding for automated labelling equipment used across packaging and production lines. We diagnose sensors, motors, drives, encoders, control circuits, and PLC systems affecting label placement and machine operation.
Symptoms We Resolve
COMMON LABELLING MACHINE FAULTS
PRODUCT DETECTION SENSOR FAULTS
If the machine cannot reliably detect each product, labels may be missed, applied late, or the machine may stop completely.LABEL WEB SENSOR FAILURE
Web and gap sensors monitor label position and material movement. Dirty optics, damaged wiring, or incorrect setup can create inconsistent label feeding.MOTOR OR DRIVE TRIPS
Label feed and conveyor motors may stop because of VSD faults, motor overload, damaged cabling, or mechanical resistance.ENCODER SIGNAL FAULTS
Encoders provide speed and position feedback. Signal loss or unstable pulses can cause poor timing, inconsistent placement, or machine faults.PLC TIMING & SEQUENCE PROBLEMS
The machine may be receiving every signal but processing them in the wrong order due to program, timing, or field-device issues.CONTROL PANEL WIRING FAULTS
Loose terminals, damaged relays, failed power supplies, and ageing control wiring can create difficult intermittent failures.
The Lectro Advantage
WHY CHOOSE LECTRO POWER SYSTEMS?
SENSOR & SIGNAL DIAGNOSTICS
We test detection devices, encoders, switches, and their controller inputs rather than simply adjusting sensors until the machine starts.DRIVE & MOTOR SUPPORT
We diagnose the electrical systems responsible for label web movement and product conveying.PLC CONTROL EXPERIENCE
We can trace machine logic and determine which control condition is preventing correct operation.
FAQs